1. Introduction

The Remove the Remax Trimmer Head BC200DL, like many other trimmer heads, is subject to wear and tear over time. Whether you need to replace the trimmer line, clean the head, or replace the entire assembly, knowing how to properly remove the trimmer head is a necessary skill. This guide will provide clear instructions, including safety tips, common issues you may encounter, and maintenance advice to ensure that your Remax BC200DL continues to perform at its best.

2. Understanding the Remax BC200DL Trimmer

Before delving into the specifics of removal, it’s helpful to understand the key features of the Remax BC200DL trimmer. This model is a lightweight, efficient gas-powered trimmer, often used for both residential and light commercial use. It features a durable, easy-to-use design that makes it suitable for various tasks, such as trimming grass, weeds, and small brush. The trimmer head is responsible for holding the cutting line and enabling the tool to cut effectively.

Key Features of the BC200DL Trimmer:

• Engine Type: 2-cycle gas engine
• Cutting Width: Typically 16–18 inches depending on the model
• Trimmer Head Type: Bump-feed or fixed line
• Weight: Lightweight, making it suitable for prolonged use
• Line Type: Most often uses nylon cutting line, which needs regular replacement.

Understanding how your trimmer works will help you determine the best time for removal and replacement of the trimmer head.

3. Importance of Trimmer Head Maintenance

Maintaining your trimmer head is important for ensuring smooth operation and avoiding damage to the trimmer itself. The head is the most used part of the trimmer, and it often experiences heavy friction and impact as the line comes into contact with the grass, weeds, or brush. Regular maintenance, including removing the head to check for debris or replacing the trimmer line, can significantly prolong the lifespan of your trimmer.

Here are a few reasons why you should consider removing and maintaining your trimmer head regularly:

• Preventing Clogs: Grass, dirt, and debris can clog the trimmer head, leading to inefficient cutting and potential damage.
• Replacing Worn-Out Parts: The bump mechanism and line spool may wear out, affecting performance.
• Cleaning: Removing the head allows for thorough cleaning and inspection for wear and tear.
• Upgrading: Some users may choose to upgrade their trimmer head to a more advanced design, improving their trimmer’s cutting ability.

4. Tools Needed for the Removal

To ensure that the trimmer head removal goes smoothly, you’ll need a few tools. Most of these tools are common and may already be in your toolbox, but here is a list of what you’ll need:

• Safety gloves: To protect your hands during the process.
• Screwdriver: Typically a flathead screwdriver will work to loosen screws, but make sure to check the type of fastener used on your trimmer.
• Socket wrench or spanner: To unscrew the trimmer head assembly, some models require this.
• Pliers: If you encounter a stubborn part that needs extra grip.
• Needle nose pliers: For precision when working with small parts like springs or retaining clips.
• Replacement parts: If you intend to replace the head, have your new trimmer head and line on hand.
• Lubricant: For cleaning and maintaining any parts that may need lubrication after the head is removed.

Make sure to have a clean, flat surface to work on as well as a container to place small parts like screws and washers.

5. Step-by-Step Guide to Removing the Trimmer Head

Step 1: Turn Off the Engine

Ensure that the engine is turned off, and the trimmer is completely cool before starting the process. If you are working on a gas-powered model, it’s best to disconnect the spark plug to avoid any accidental starting.

Step 2: Remove the Spark Plug Wire (Gas Models)

For safety reasons, remove the spark plug wire from the spark plug. This will ensure that there is no electrical current running to the engine while you’re working.

Step 3: Release the Cutting Line

If you still have line attached to the trimmer head, the next step is to release it. You can either cut the line or unwind it, depending on how much is left. If your trimmer head uses a bump-feed mechanism, you may need to gently tap the head on the ground to release any remaining line.

Step 4: Access the Fasteners

Locate the fasteners that are holding the trimmer head in place. Depending on the design, there may be screws, bolts, or clips. Use a screwdriver or socket wrench to remove them.

Step 5: Remove the Trimmer Head

Once all the fasteners are removed, gently pull the trimmer head off the shaft. In some models, you may need to use pliers to release a locking mechanism that holds the head in place. Be careful not to damage any parts during this process.

Step 6: Inspect and Clean

Once the head is removed, inspect the trimmer head for any damage or wear. Clean any debris or grass buildup from the head and the shaft. If you notice any broken components, replace them before reattaching the trimmer head.

Step 7: Reinstall or Replace

Once the old head is removed and cleaned, you can proceed with installing the new trimmer head or preparing the old one for reinstallation. Ensure that the new head is compatible with your BC200DL model.